Technical Data - GreenWorks GD24AG Manual Del Operario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
EN
5
MAINTENANCE
Remove the battery pack from the machine before
maintenance.
Do not use strong solvents or detergents on the plastic
housing or components.
5.1
GENERAL MANINTENANCE
Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
Clean the machine with a dry cloth. Do not use slovents.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Use only approved replacement parts.
6

TECHNICAL DATA

Rated Voltage
No Load Speed
Shaft
Disc diameter
Weight (without battery)
Battery model
Charger model
Measured sound pressure
level
Measured sound power level 94.2 dB(A), K
Vibration
The recommended ambient temperature range:
Item
Appliance storage tempera-
ture range
Appliance operation temper-
ature range
Battery charging temperature
range
WARNING
WARNING
WARNING
CAUTION
24 V
-1
10500 min
M14
125 mm
1.58 kg
G24B2 / G24B4 and other
BAG series
2913907 and other CAG ser-
ies
83.2dB(A), K
= 3 dB(A)
pA
= 3 dB(A)
wA
2
6.2 m/s
, K = 1.5 m/s
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
English
Item
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
7
WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
8
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
GLOBGRO AB
Globe Group Europe
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name:
Peter Söderström
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
2
Model:
Serial number:
Year of Construction:
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
is in conformity with the provisions of the following
other EC-Directives:
2011/65/EU & (EU)2015/863
6
Temperature
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
Angle Grinder
3200207 (AGD401)
See product rating label
See product rating label

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Agd401

Tabla de contenido