Lighting Of Two-Color Led According To The Condition Of The Device; Reboot And Reset Button Description; Terminal Board 2Voice Side; Power Terminal Board On Ipercom Side - Urmet 1083/59 Manual De Instalación

LIGHTING OF TWO-COLOR LED ACCORDING TO THE
CONDITION OF THE DEVICE
Switching on and starting the device
Device powered and confi gured (ready to use)
Calls in progress from door units
Conversation between IperCom keypads and 2Voice
apartment stations in progress
Conversation between 2Voice secondary keypads and
2Voice apartment stations in progress

REBOOT AND RESET BUTTON DESCRIPTION (2)

Pressing
Longer than 10 seconds
5 consecutive times
(separated by less than
1 s)

TERMINAL BOARD 2VOICE SIDE (8)

]
POWER 2Voice power connection (Ref. 1083/20A)
]
LINE 1 Connection to riser column 1 - 2Voice side
]
LINE 2 Connection to riser column 2 - 2Voice side
]
IN 0 VPE1 connection secondary 2Voice
]
IN 1 VPE2 connection secondary 2Voice

POWER TERMINAL BOARD ON IPERCOM SIDE (5)

+
]
Local power supply connection (Sch. 1039/20) IperCom side (*)
-
(*) Use terminals if IP switch is not POE.
10
Condition
IperCom side LED
Fixed green
Green blinking
Red blinking
2VOICE side LED
Red blinking /
Green fi xed
Green fi xed
Green blinking
Green blinking
Green blinking
2Voice side LED
Red blinking
–
IperCom side LED
Fixed green /
Red blinking
Green fi xed
Green fi xed
Green blinking
Green fi xed
Description
The device will be rebooted on
2Voice side and on IperCom
side.
The device will be reset
to default parameters; all
confi gurations will be lost.
DS1083-113