General Information; Warning - Simons Voss Technologies SmartCD.MP Manual Del Usario

1.0

general information

Smart CD.MP can be used to programme SimonsVoss Mifare® Pure Smart
Card products. These include the following items:
· Smart Cards or Smart Tags
· Cylinder SC (.MP)
· Smart Handle SC (.MP)
· Smart Relay SC (.MP)
2.0

Warning

· Avoid placing in direct sunlight.
· Keep away from sources of electrical and magnetic interference.
· Do not allow the programming device to come into contact with damp.
· Do not allow the programming device to come into contact with oil, paint,
acids or similar aggressive substances.
· LSM 3.2 or higher is required to use the programming device.
· Smart CD .MP cannot be used to programme any SimonsVoss hybrid
products, such as Cylinder Z4.MH.
· The programming device is powered via a USB port. It is not permitted to
supply power in any other way.
· The user must not modify the product in any way.
· The product is subject to modifications or further technical developments
by SimonsVoss Technologies AG.
· Access through a door may be blocked due to defective or incorrectly
programmed Smart Cards or locks. SimonsVoss AG is not liable for con-
sequences of incorrect programming, such as blocked access to injured
11