Pre-Installation; Planning Installation; Tools Required; Package Contents - ETI Solid State Lighting 53505111 Guía De Uso Y Cuidado

Pre-installation

PRODUCT DESCRIPTION AND CHARACTERISTICS
An LED under cabinet light fixture can be directly mounted to the underside of a cabinet or wall and requires little space. It is energy-saving,
environmentally friendly, and used for emitting soft and even distribution of light.

PLANNING INSTALLATION

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents
list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement
parts.
nOTe: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
Identify the desired location for the LED fixture to make sure the length of the fixture fits the cabinet.

TOOLS REqUIRED

Phillips
screwdriver

PACKAGE CONTENTS

Part Description
A Under Cabinet Light
Fixture

HARDWARE INCLUDED

nOTe: Hardware not shown to actual size.
Part Description
AA Strain Relief
BB O-Ring
CC Wire Clip
DD Mounting Screw (long)
EE Drywall Anchor
FF Mounting Plate
GG 5 ft. Power Cord
HH 14.5 in. Linking Cable
II End-to-End Connector
JJ Mounting Screw (short)
Measuring Tape
quantity
1
quantity
1
4
2
2
4
1
1
1
1
4
Power Drill
with 1/8 in.
drill bit
AA BB
EE
FF
II
3
Please contact 1-855-384-7754 for further assistance.
A
CC
GG HH
JJ
www.ETiSSL.com
DD