Initial Operation; Cleaning Instructions - SOLAMAGIC 500 W Instrucciones De Montaje Y De Uso

Initial operation

The heater must be connected to the mains. For those models without a wall or pull
switch, heating starts as soon as the plug is plugged into the socket. For models
with a wall or pull switch or a wireless switch, heating starts when the switch is
turned on or via the remote control.
If necessary see also the separate operating instructions for the remote control.
„All in one" wiring diagram
L
N
PE

Cleaning instructions

• Disconnect the heater from the mains.
• Allow the casing to cool.
• Wipe the casing clean with a moist, soft cloth. Do not use any detergent.
Never immerse the heater in liquids nor spray-wash it.
Possible discoloration of the protective grille due to heat effects results from
normal physical processes and is not a defect.
08/2016
WS 1400W
EBS 25W
EBS 25W
104
Switch activation
1x – Light on/heat off
2x – Light off/heat on
3x – All on
4x – All off
L = Brown
N = Blue
PE = Protective earth (green/yellow)
WS = Radiant heater
EBS= Recessed downlight