Chloramine (Mono) With Powder Pack - Orbeco SC450 Manual De Instrucciones

Methods
GB

Chloramine (Mono) with Powder Pack

CA
0.04 – 4.50 mg/l Cl
2
Fill a clean vial (24 mm Ø) with 10 ml of the water sample and
0.0.0
perform zero calibration (see "Operation").
Add the contents of one Monochlor F RGT Powder Pack straight
from the foil into the water sample.
Close the vial tightly with the cap and swirl several times to mix the
contents (approx. 20 seconds).
Place the vial in the sample chamber making sure that the marks
are aligned.
Wait for a reaction period of 5 minutes (Note 2).
Zero
!
Test
(Countdown can be activated, see page 7)
CA
The method symbol flashes for approx. 3 seconds.
RESULT
The result is shown in the display in mg/l Monochloramine (as Cl ).
2
9
SC450_V1_11.2010