To Ensure Compliance - Sun Microsystems Netra t 1400 Manual De Seguridad

English
Products with the CE marking comply with the protection requirements of the
following EU Directives:
EMC Directive 89/336/EEC, as amended by 93/68/EEC, by application of the
following harmonised standards:
EN 55022:
EN 55024:
Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC, by application of
the following harmonised standard:
EN60950:
Warning – This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures to correct this interference.

To Ensure Compliance

The following additional components or accessories are required:
1. Shielded cables having earthed metal shells shall be used for connection to all
input/output ports.
2. Cable connectors shall be shielded type (for example, shielded RJ45 plugs).
3. Ethernet cables shall be IEEE 802.3 compliant, and shall be of the Shielded
Twisted Pair type (STP).
4. All EMC panels must be in place while the system is in operation.
5. The system must be reliably connected to earth.
6. Antistatic wrist-strap connection points are located on the front and rear lower
panels of the unit.
6 Netra t 1400/1405 Compliance and Safety Manual • September 1999
1994—Electromagnetic Interference
1998—Electromagnetic Immunity
1992 AMD4, Safety of Information Technology Equipment.