Sun Microsystems Netra t 1400 Manual De Seguridad página 21

Safety Requirements
For protection, observe the following safety precautions when setting up the
equipment:
Follow all cautions, warnings and instructions marked on the equipment.
Ensure that the voltages and frequency rating of the power receptacle match the
electrical rating label on the equipment.
Never push objects of any kind through openings in the equipment. They may
touch dangerous voltage points or short circuit components resulting in fire or
electric shock.
Refer servicing of equipment to qualified personnel.
Ground the Instrument
Class 1 equipment:
To minimize shock hazard, the equipment enclosure must be reliably connected to
an electrical ground (see
Do Not Operate in an Explosive Atmosphere
Do not operate the equipment in the presence of flammable gases or fumes.
Operation of any electrical equipment in such an environment constitutes a definite
safety hazard.
Keep Away From Live Circuits
Only trained personnel may remove equipment covers for internal subassembly or
component replacement or any internal adjustment. Under certain conditions,
dangerous voltages may exist even with the power supply removed.
Do Not Service or Adjust Alone
Do not attempt internal service or adjustment unless another person, capable of
rendering first aid and resuscitation, is present.
on page 18).
FIGURE 1
Safety 17