Removing Previous Software Releases; Installing The Sunvideo Plus 1.3 Software - Sun Microsystems SunVideo Plus 1.3 Guia De Instalacion

Removing Previous Software Releases

You must remove any previous releases of the SunVideo Plus software before
installing any new software packages.
1. Log in as superuser.
2. Uninstall previous SunVideo Plus software packages.
Note – SUNWo1kpu and SUNWo1kpd are core packages; hence, be sure that these
packages are removed last by the pkgrm command.
Remove SunVideo Plus 1.0 by typing:
hostname# /usr/sbin/pkgrm SUNWvtsvp SUNWsvpab SUNWo1kpu SUNWo1kpd
Remove SunVideo Plus 1.1 or 1.2 by typing:
hostname# /usr/sbin/pkgrm SUNWvtsvp SUNWsvpab SUNWo1kpx SUNWo1kpu
SUNWo1kpd

Installing the SunVideo Plus 1.3 Software

The SunVideo Plus 1.3 software is provided on the CD included with your SunVideo
Plus installation kit.
1. Log in as superuser (root).
2. Insert the SunVideo Plus 1.3 CD into the CD-ROM drive connected to your
system.
If your system is running Volume Manager, it should automatically mount the
CD-ROM to the /cdrom/sunvideo_plus_1_3 directory.
If your system is not running Volume Manager, mount the CD-ROM as follows:
hostname# mkdir -p /cdrom/sunvideo_plus_1_3
hostname# mount -F hsfs -r /dev/dsk/c0t6d0s2
/cdrom/sunvideo_plus_1_3
3. Install the SunVideo Plus 1.3 software using the pkgadd command:
en-4 SunVideo Plus 1.3 Installation Guide • October 1999