General Safety Warnings; Work Area Safety; Electrical Safety - Ryobi OBL1820H Traducción De Las Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
WARNING
When using the product, the safety rules must be
followed. For your own safety and that of bystanders, you
must read and fully understand these instructions before
operating the product. Please keep these instructions
safe for later use.
WARNING
The product is not intended to be used by children or
persons with reduced physical, mental or sensory
capabilities. Children should be adequately supervised
to ensure they do not play with the product.
TRAINING
Read the instructions carefully. Be familiar with the
controls and the correct use of the product.
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions
to use the product. Local regulations may restrict the
age of the operator.
Keep in mind, that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Keep bystanders, children and pets 15 m away from
the area of operation. Stop the product if anyone enters
the area.
PREPARATION
Some regions have regulations that restrict the use of
the product to some operations. Check with your local
authority for advice.
While operating the product always wear substantial
footwear and long trousers. Do not operate the product
when barefoot or wearing open sandals. Avoid wearing
clothing that is loose fitting or that has hanging cords or
ties; they can be caught in moving parts.
Do not wear loose clothing or jewellery that can be
drawn into the air inlet.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Wear hearing protection at all times whilst operating the
product. This product is extremely noisy and permanent
hearing injury may result if precautions to limit your
exposure, reduce noise and wear hearing protection
are not strictly adhered to.
Wear full eye protection at all times whilst operating this
product. The manufacturer strongly suggests a full face
mask or fully enclosed goggles. Normal spectacles or
sun glasses are not adequate protection. Objects can
be thrown at high speed by the powerful air jet at any
time and may rebound from hard surfaces toward the
operator.
Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
"off" switch does not stop the product.
Before each use, always visually inspect to see, that the
housing is undamaged and that guards and handles are
in place and properly secured.
Return to an authorised service centre to replace
damaged or unreadable labels.
Never operate the product with defective guards or
shields, or without safety devices, for example debris
collector in place.
Keep all cooling air inlets clear of debris.
Use rakes and brooms to loosen debris before blowing.
Clear the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or
string which can be blown a considerable distance by
high velocity air.

GENERAL SAFETY WARNINGS

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do
not
operate
power
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
Save all
ET
HR
SL
SK
BG
tools
in
explosive
English |
1

Publicidad

Tabla de contenido
loading

Tabla de contenido