How To Set E.s.p - LG MULTI V 2 Serie Manual De Instrucciones

How to Set E.S.P?

How to Set E.S.P?
What is an E.S.P function?
This is the function that decides the strength of the wind for each wind level and because this function is
to make the installation easier, please do not use this function when using the remote controller.
If you set ESP incorrectly, the air conditioner may malfunction.
This setting must be carried out by a certificated-technician.
This function is using for only Duct product
❊ Weak and Power setting is not available for some products.
❊ Because the ESP value is already appropriately set when manufactured from the factory, it is recommended
that you do not change the ESP value.
18 18 18 Indoor Unit Indoor Unit Indoor Unit
1. Press button for 4 seconds to
enter the installer setting mode until
timer segment display "01:01".
2. Repeat pressing Function Setting key to select
Function code 03.
03:00:155
Function Code
3. Set ESP step by pressing
button (01: very low,
02: low, 03: medium, 04: high.
05: power).
4. Move to ESP setting by
pressing button.
5. Press button to select
ESP value(0~255).
6. Press button to save or release
7. Press button to exit or the
system will automatically exit after
25 seconds without any input
ESP step ESP value