Cleaning With Accessory Tools (Option) - Nobles STRIVE COMPACT Manual Del Operaripo

FOR SAFETY: When operating machine, if foam or
liquid begins to leak from machine, immediately
shut off machine.
FIG. 16
7. View the water pickup from the recovery window
(Figure 17). When the water pickup stops, unplug
the power cord and empty the recovery tank.
The machine is equipped with a vacuum shut--off
float that will automatically stop the water pickup
when the recovery tank reaches the full point. A
sudden change in vacuum motor sound will occur.
FIG. 17
ATTENTION: Check for excessive foam in the
recovery tank. Empty tank if excessive. Foam may
not activate the shut- -off float which may result in
vacuum motor damage.
8. When transporting machine, roll the machine on
both the main and rear tilt wheels.
FOR SAFETY: When transporting machine, do not
wheel up or down stairs.
Nobles Strive Compact (03- -08)
Home Find... Go To..

CLEANING WITH ACCESSORY TOOLS (Option)

1. Connect the accessory tool hoses to solution hose
coupler and vacuum hose port located at the front
of the machine (Figure 18).
FIG. 18
2. Fill the solution tank (See FILLING SOLUTION
TANK on page 6).
3. Press the main power switch to the on ( I ) position
(Figure 19).
FIG. 19
4. Operate the accessory tool (Figure 20).
WARNING: Fire or Explosion Hazard, Do Not
Use or Pick Up Flammable Materials.
FIG. 20
OPERATION
EN
9