Technical Specifications - Omcan Santos 28 Manual Del Suaurio

Model
Production per Hour
Power
RPM
Electrical
Current
Weight
Packaging Weight
Dimensions
Packaging Dimensions
Item Number
USING FOR THE FIRST TIME:
1. Remove the plunger (3).
2. Rotate the clamping handle (1) by one half turn to release the cover (2) (Fig. 2).
3. To be able to remove the cover, turn then lift the cover (2) (Fig. 3).
4. Using the basket locking spanner (18), unscrew the basket fixing screw (15) completely, while holding the
basket immobile with the other hand (Fig. 4).
5. Raise the bowl (4). The basket (5) should come out of its seating (Fig. 5).
6. Remove the basket assembly (5) and wash in clean water.
7. Wash all the elements in contact with food in clean water: the plunger (3), the cover (2), the bowl (4) and
the pulp container (6) (Fig. 6).
INSTALLING THE PRODUCT DISCHARGE CHANNEL
1. Place the discharge channel (16) on the bowl (4).
2. Insert and screw tight the 2 screws (17) on the bowl pins (4) (Fig. 7).
ASSEMBLY
1. Fit the bowl (4) on the bowl centering device (7) making sure that the juice run-off spout is located in the
indent provided for that purpose in the bowl centering device (7) (Fig. 8).
2. Place the basket assembly (5) in the bowl (4), making sure it is correctly located on the motor shaft (8). The
drive pin (19) needs to be in the grooves in the basket assembly (5) (Fig. 9).
3. Using the spanner (18) insert the basket locking screw (15) and screw it tight. During this operation, the
basket shifts downwards a few millimeters. During the locking operation the basket can be held with one

Technical Specifications

1300 W / 1.74 HP
59.5 lbs. / 27 kgs.
19" x 12.6" x 20" / 483 x 320 x 508mm
26" x 14" x 23.2" / 660 x 356 x 589mm
7
Santos 28
100 L / 105.7 QT
3600
120V / 60Hz / 1
11A
53 lbs. / 24 kgs.
10827
Installation