English
Should you have any questions or comments,
please contact us at www.mutsy.com/contact
Contents of the box
· Synthetic seat including upholstery, seat redu-
cer, 2 belt protectors and a buckle protector.
· Hood and cover
Available accessories:
· The Mutsy Traveller adapter, to mount your
Traveller on a Mutsy pram
· The Trans range Traveller adapter, to mount
your Traveller on a Trans range pram
· A rain cover
Installing the hood and cover
· Press the plastic pins on either side of the hood
in the plastic openings on the sides of the back
of the seat. Secure the loops onto the far end
of the back of the seat. Secure the cover by
means of the loops on the sides. Press the but-
tons of the hood and lift to release it.
The reducer
· The reducer provides additional support to the
head and back in the first months. In order to
install the reducer, pull the belts through the
openings in the reducer (E1)
Securing the Traveller in the car
· Set the carrier bar to position 1. See the range
of the bar positions in illustration H.
· Fasten the seatbelt and pull the hip belt
through the front opening (A1, B1).
· Pull the shoulder strap through the back slots
(A2, B2)
! Make sure that you do not let the belt run be-
hind the adjust button of the back.
· Tighten the belt by pulling it as indicated in
illustration C.
! Every time you adjust the back of your seat you
must tighten the belt again.
Mounting the Traveller onto the Mutsy pram
· The Traveller car seat fits all Mutsy prams by
means of an adapter set.
· Push the adapter set into the universal connec-
tion points of the frame (K)
! Place the adapter marked R on the right-hand
side, and place the adapter marked L on the
left-hand side.
· Place the Traveller on the adapters facing back-
wards. Click the Traveller into place by pushing
the carrier bar backwards. Make sure that the
Traveller is secured by testing whether you can
lift the car seat off the frame.
· Note! Prior to mounting the Traveller onto the
Mutsy slider, please refer to the Slider user in-
structions.
Mounting the Traveller onto the Trans range pram
· Slide the adapter set over the central connec-
18