Kenwood TTM560 Serie Manual De Instrucciones página 3

key
removable warming rack
Peek & View™ carriage lever
(with 'Hi-Rise™' for extra lift)
cancel button with indicator light
browning control
button with indicator light
crumb tray
cord storage
to use your toaster
1 Plug the toaster into the power
supply.
2 Move the browning control to the
desired setting. Use a low setting for
light toasting and for thin or dry
bread.
3 Insert the bread, muffins, bagels etc.
4 Lower the lever
lever will not stay down unless the
toaster is plugged in). The 'cancel'
button will illuminate.
5 To toast a single slice of bread, place
the bread into the
the carriage lever and press the
button. The
button will illuminate.
Use the carriage lever to lift the toast
G
to Peek & View™ at any time
without cancelling the toasting cycle.
To stop toasting during the cycle,
G
press the 'cancel' button, the toast
will pop up and the 'cancel' button
light will go off.
6 Your toast will pop up
automatically, to raise it higher, lift
the lever.
hints on using your
toaster
Select a lower setting for light
G
browning or for dry bread.
Dry/stale bread toasts more quickly
G
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
G
bread slices are of an even
thickness, freshness and size.
until it locks. (The
, lower
In order to achieve uniform browning
G
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
warming rack safety
1 Never set the browning control
higher than
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you're using the toaster slots,
always remove the warming rack so
it can't burn you.
to use the warming rack
1 Place the warming rack on top of
toaster .
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no higher
than . Lower the lever.
4 The lever will automatically rise at the
end of the warming cycle. Turn the
items over and repeat the operation.
Watch to make sure they don't burn.
5 To remove the warming rack, allow
the toaster to cool and unplug.
care and cleaning
1 Before cleaning, unplug your toaster
and let it cool down.
2 Slide out the crumb tray
then replace. Do this regularly:
crumbs can smoke or even burn.
3 Wipe the outside of the toaster with
a damp cloth, then dry. Do not use
abrasives.
3
when using the
. Clean,