Axis F Serie Guia De Instalacion página 15

RJ12 Connector
The R12 connector is used for connecting the sensor unit to the main
unit. For information on how to shorten the sensor unit cable see Shorten
Sensor Unit Cable on page 10.
SD Card Slot
An SD card (not included) can be used for local recording with removable
storage. For more information, see Specifications on page 15.
NO NO NO TICE TICE TICE
To prevent corruption of recordings, the SD card should be
unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control Button
The control button is used for:
• Resetting the product to factory default settings. See page 21.
• Connecting to an AXIS Video Hosting System service or AXIS
Internet Dynamic DNS Service. For more information about
these services, see the User Manual.
Specifications
The Axis product is intended for indoor use.
Product Classifica-
tion
AXIS F41
IEC/EN 605
29
AXIS F41 Main Unit
Temperature
-30 °C to 60 °C
(-22 °F to
140 °F)
15
Humidity
10-85% RH
(non-condensing)