lancer XBT-L1000 Manual De Instrucciones página 12

Other devices :
Functions
N° of last fault acknowledged
N° of last alarm groups acknowledged
Alarms table
: Functions selected by defaut.
: Other functions availables .
: Not available
4 - Dialogue table configuration
- Select Configuration / Dialogue table,
E
- Indicate the table start address, the cycle time,
N
G
- Construct the table by adding or deleting the functions required for your application
L
I
Note : For the detail of the contents of the dialogue table, refer to chapter D of Volume 1
S
and chapter E of Volume 2 of the MAGELIS product line operating manuals.
H
5 - Device symbol
- Select Configuration / Device Symbol.
- Add the addresses of the devices which can be accessed by the XBT.
Caution : the TXBT graphic stations can only access the automatic systems on the same
Modbus Plus segment. Addressing throught a Modbus Plus bridge is not supported.
W9 152 6284 0111 A 04
SERVER 1
Modbus Plus protocol
XBT-F01 / F02
SERVER 2
12
XBT-F03
09- 1999