Analysis Of Electromagnetic Spectrum Occupation ("Sniffer" Function) - marposs E86N Manual De Instalacion Y Uso

ENGLISH
10.4

Analysis of electromagnetic spectrum occupation ("SNIFFER" function)

Electromagnetic spectrum occupation analysis is performed in two steps:
•
Scan
The E86N interface cyclically scans all 64 channels, saving the maximum amplitude of the signal received for each channel;
•
Viewing results
The E86N interface displays the channels and the maximum amplitude saved during the previous scan.
To activate the function, set the interface to "Programming Mode" (press "Enter" for longer than 2 seconds), press the "Select" key
several times until the display shows the text "rSS", then press "Enter".
> 2 seconds
> 2 seconds
78
> 2 seconds
XX
Enter=List ▲
Enter=List ▲
Select= List ▼'
Select= List ▼'
> 2 seconds
XX XX
Enter=List ▲
Select= List ▼'
E86N- Touch system with radio transmission
> 2 seconds
XX