One for All URC 1919 Manual Del Usario página 4

STEP 1: SET UP YOUR
TELEVISION
THE MAJORITY OF NEWER
TOSHIBA TVS SHOULD
WORK DIRECTLY.
After putting batteries in, just
test some of the keys, and if
they work, your remote is ready.
If not, follow the next steps:
1
Make sure your TV is on
(not on standby).
Hold down RED + BLUE until
the LED behind the Power Key
blinks twice.
2
Point towards the TV and hold
down the POWER KEY until the TV
turns off.
The remote will send a different
Power signal every 3 seconds.
As soon as the TV turns off, let
go of the POWER KEY.
The LED will blink twice. Now
test the rest of the keys on the
remote. If they work as your
original did, your remote is
ready to use.
FINISH
If you find some keys still do
not work as expected (or not at
all), proceed to the next step.
4
ENGLISH
STEP 2:
DOES NOT WORK
AS EXPECTED
ARE SOME KEYS
NOT WORKING AS
EXPECTED?
If you find some keys do not
work as expected (or not at all),
proceed to the next step.
1
Make sure your TV is on
(not on standby).
Hold down RED + BLUE until
the LED behind the Power Key
blinks twice.
2
Point towards the TV and hold
one of the keys that is not
working correctly (for example
MENU).
The remote will send a signal
every 3 seconds.
When the correct function is
shown on the screen (in this
case the MENU), let go of the key.
The LED will blink twice - your
remote is ready to use.
IF STEP 1
FINISH