GE JKS10–27 Manual Del Usuario página 5

Ocultar thumbs Ver también para JKS10–27:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings
BAKE/TEMP RECALL Pad
Press this pad to select the bake function.
BAKE Light
Flashes while in edit mode—you can change
the oven temperature at this point. Glows
when the oven is in bake mode.
START/ON Pad
Must be pressed to start any cooking function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake or broil
mode and the times set for the timer or
automatic oven operations. The display
will show "PrE" while preheating. When
the oven reaches the selected temperature,
the oven control will beep and the display
will show the oven temperature.
If "F–" and a number or letter flash in the display
and the oven control signals, this indicates a function
error code. Press the CLEAR/OFF pad. Allow the oven
to cool for one hour. Put the oven back into operation.
If the function error code repeats, disconnect the power
to the range and call for service.
If your oven was set for a timed oven operation and
a power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there
has been a power outage. Reset the clock.
KITCHEN TIMER ON/OFF Pad
Touch this pad to select the timer feature.
Then press + and – pads to adjust time.
TIMER Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the
timer has been activated. Flashes again when
the time has run out until the control is reset.
CLOCK Pad
To set the clock, press this pad twice and
then press the + and – pads. The time of
day will flash in the display when the oven
is first turned on.
DELAY START Pad
Use along with the COOKING TIME pad to set
the oven to start and stop automatically at
a time you set.
DELAY START Time Light
Flashes while in edit mode—you can change
the delay start set time at this point. Glows
when the function has been activated.
COOKING TIME Pad
Press this pad and then touch the + or –
pads to set the amount of time you want
your food to cook. The oven will shut off
when the cooking time has run out.
COOKING TIME Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the
function has been activated. Flashes again
when the time has run out until the control
is reset.
GEAppliances.com
5

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Jts10–30

Tabla de contenido