Product Disposal - Nice One-Max Instrucciones Y Advertencias Para La Instalación Y El Uso

What to do if...
(troubleshooting guide)
The motor does not move even if powered in an Ascent
or Descent phase:
1) check whether a thermal cut-out has tripped: In this
case wait for the motor to cool;
2) check that the mains power is ON and that it corre-
sponds to the values on the motor dataplate.
3) check whether the two limit switches, due to incorrect
settings, engage at the same time; in this case rotate
the two adjustment screws through a few turns, in the
direction of the "+" sign.
After these checks, if the motor still does not move,
contact a specialist technician or the Nice Assistance
Service.

Product disposal

This product is an integral part of the automation and
therefore must be disposed together with the latter.
As in installation, also at the end of product lifetime, the
disassembly and scrapping operations must be performed
by qualified personnel.
This product comprises various types of materials: some
may be recycled others must be disposed of. Seek infor-
mation on the recycling and disposal systems envisaged
by the local regulations in your area for this product cate-
gory.
Caution! – some parts of the product may contain pollu-
tant or hazardous substances which, if disposed of into the
environment, may cause serious damage to the environ-
ment or physical health.
As indicated by the symbol alongside, dis-
posal of this product in domestic waste is
strictly prohibited. Separate the waste into
categories for disposal, according to the me-
thods envisaged by current legislation in your
area, or return the product to the retailer when purchasing
a new version.
Caution! – Local legislation may envisage serious fines in
the event of abusive disposal of this product.
Technical specifications
(Controller and Motor)
• Power supply voltage and frequency; current and
power; torque and speed: Refer to the technical data
on the dataplate of each model
• Motor diameter: 45 mm
• Nominal operating time: Maximum 4 minutes
• Protection rating: IP 44 (tubular motor)
• Operating temperature: -20°C ÷ +55°C
• Connection cable length: 2.5 m
Notes:
- All technical specifications stated in this section refer to
an ambient temperature of 20°C (± 5°C).
- Nice reserves the right to apply modifications to the prod-
uct at any time when deemed necessary, maintaining the
same intended use and functionality.
CE Declaration Of Conformity
Note - The contents of this declaration correspond to those of the
last revision available of the official document, deposited at the regis-
tered offices of Nice S.p.a., before printing of this manual. The text
herein has been re-edited for editorial purposes.
Number: 222/MAX Revision: 3
The undersigned Lauro Buoro, managing director, declares
under his sole responsibility that the following product:
Manufacturer's name: NICE s.p.a.
Address: Via Pezza Alta 13, Z.I. Rustignè,
31046 Oderzo (TV) Italy.
Type: One Max and One Max H
tubular motors
Models: XM09xxxY0, XM15xxxY0,
XM28xxxY0, XM56xxxY0,
XM75xxxY0, XM93xxxY0
xxx: Non-significant variations
Y: 0, H
conforms with the requirements of the following EC direc-
tives:
• 2006/95/EEC (ex directive 73/23/EC) DIRECTIVE
2006/95/EEC OF THE EUROPEAN PARLIAMENT AND
COUNCIL of 12 December 2006 regarding the approx-
imation of member state legislation related to electrical
material destined for use within specific voltage limits,
according to the following harmonised standard:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 +
A2:2006; EN 60335-2-97:2006; EN 50366:2003 +
A1:2006
• 2004/108/EEC (ex directive 89/336/EEC) DIRECTIVE
2004/108/EC OF THE EUROPEAN PARLIAMENT AND
COUNCIL of 15 December 2004 regarding the approxi-
mation of member state legislation related to electromag-
netic compatibility, repealing directive 89/336/EEC, ac-
cording to the following harmonised standards:
EN 55014-1:2006; EN 55014-2:1997 + A1:2001; EN
61000-3-2:2006; EN 61000-3-3:1995 + A1:2001 +
A2:2005
Oderzo, 27 May 2008
Lauro Buoro
(Managing Director)
English – 5