Ø6.5 mm x 100 mm Tapping Bolt
8. Insert four 50 mm Wood Dowels (7) into the end holes of the Upper Cross Assembly with warning
label (K). Attach the Upper Headboard Posts (E and F) to the Upper Cross Assembly (K) with four 100
mm Tapping Bolts (5) as shown. Tighten the bolts with the enclosed hex wrench.
9. Repeat the previous step to attach Upper Footboard Posts (G and H) to the other Upper Cross Assembly
(K).
UPPER BUNK ASSEMBLY
(8 used in this step)
⑤
10
Ø10 x 50 mm Wood Dowel
(8 used in this step)
⑦