Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
(1) 1/4" x 100 mm Bolt
(3) 1/4" x 38 mm Bolt
(Qty. 2+1 extra)
(5) Ø6.5 mm x 100 mm Tapping Bolt
(7) Ø10 x 50 mm Wood Dowel
(Qty. 40+2 extra)
(10) Ø4 mm x 30 mm Screw
(Qty. 6+1 extra)
(13) Ø3.5 mm x 19 mm Screw (Qty. 4+1 extra)
(15) L-shaped Metal Bracket (Qty. 16)
Tools required: Hex wrench (provided) and Phillips screwdriver (not provided).
Parts and Hardware List
(Qty. 8+1 extra)
(Qty. 24+1 extra)
(8) Ø8 x 30 mm Wood Dowel
(Qty. 16+1 extra)
(11) Bed Connector Pin
(Qty. 4)
6
(2) 1/4" x 45 mm Bolt
(Qty. 8+1 extra)
(4) 1/4" x 15 mm Bolt
(Qty. 32+1 extra)
(6) Ø6.5 mm x 48 mm Tapping Bolt
(Qty. 20+1 extra)
(9) Ø4 mm x 35 mm Screw
(Qty. 14+1 extra)
(12) Barrel Nut
(Qty. 8+1 extra)
(14) Metal Bracket (Qty. 1)
Hex Wrench (Qty. 2)