Publicidad
Idiomas disponibles
Idiomas disponibles
4. C
ONNECTING
1.
Check if the inverter is in off status. Connect the cable.
2.
Ensure the battery voltage and the inverter input voltage matching. 12V inverter can only work with 12V
battery and 24v inverter can only work with 24v battery, if mixed will destroy the inverter.
3.
Connect the positive terminal with the positive polar to the battery and the negative with the negative polar
and please keep the inverter in off status, that's very important for the inverter.
Warning: Keep the connecting fixed or will be very dangerous.
Checking the connection again before the next step
4.
Warning: Do not inversed connected it may destroy the inverter.
5.
Press the on button, the green light on and the digital display start work. If the inverter alarms please stop
the inverter and check!
5. F
OR SAFETY
Please read carefully before using:
•
Please do not operate the inverter while your hand is wet, Keep it from the touch of children.
•
The temperature of the shell will be high after longtime working, so do not touch it in case scalded;
•
Do not put metal into the inverter in case not to electric shock.
•
Because inverter is easy to emerge arc, do not put the inverters in rain, fog, frosty, water and greasy dirt oil
are forbidden put on inverters.
•
While connecting with battery, if the battery acidic material touches the skin please wash use water at once,
if the acidic material go into the eye please go to the hospital.
•
Please do not put metal on the battery, this will cause short circuit then destroy the inverter and the battery.
•
When insert the socket of the appliance to the AC outlet of the inverter please keep you hand away from
the metal pin, to avoid electric shock.
•
Please do not put any AC electric to the AC outlet of the inverter, this will destroy the inverter and may
cause electric shock.
•
Do not disassembly products, maintain need professional.
6. P
ROTECTION AND STATE INSTRUCTION
P
ROTECTION
F
UNCTION
G
REEN
Input under voltage
protection
Input over voltage
protection
Over load protection
Over heat protection
Output short circuit
protection
Input under voltage
alarm
S
TATE DESCRIPTION
LED
R
LED
ED
on
on
on
on
on
on
on
on
off
off
on
off
AC
ALARM
OUTPUT
No alarm
No
No alarm
No
No alarm
No
Alarm as
No
ding...
Alarm as
yes
ding...
R
ECOVER METHOD
When the voltage of the battery lower
or higher than normal one the red light
on, green light of , the inverter stop
work
Reduce load, make it work under the
related load of the inverter, the inverter
will restart work ,green light on, red
light off.
The internal temperature of the inverter
return to the normal and the inverter
will restart work, green light on ,red
light off
When the voltage of the battery returns
to the normal one, the red light
off ,green light on, the inverter restart
work
6
Publicidad
