Installation And Connection - EAS ELECTRIC EMEGW20L Manual De Instrucciones

Ocultar thumbs Ver también para EMEGW20L:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation and connection

This appliance is only intended for domestic
1.
use.
This oven is intended for built-in use only. It is
2.
not intended for counter-top use or for use
inside a cupboard.
Please observe the special installation
3.
instructions.
The appliance can be installed in a 60cm wide
4.
wall-mounted cupboard.
The appliance is fitted with a plug and must only
5.
be connected to a properly installed earthed
socket.
The mains voltage must correspond to the
6.
voltage specified on the rating plate.
The socket must be installed and connecting
7.
cable must only be replaced by a qualified
electrician. If the plug is no longer to accessible
following installation, an all-pole disconnecting
device must be present on the installation side
with a contact gap of at least 3mm.
Adapters, multi-way strips and extension leads
8.
must not be used. Overloading can result in a
risk of fire.
The accessible
surface may be hot
during operation.
41

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Emegn20l

Tabla de contenido