Cisco Linksys WET610N Guía De Instalación Rápida página 12

English
E.
Connect the free end of the
network cable to the device that
you want to equip with wireless .
If you need to move the Bridge,
then make sure you take the
power adapter and network
cable with you .
Click Next .
F.
Wait until the Power and
Ethernet LEDs are solidly lit, and
the Wireless LED is flashing .
Click Next .
G.
The wireless settings are
displayed .
To save the settings in a text
file on your desktop, keep the
default, Save these settings in
a text file on my desktop .
Click Next .
H.
The Bridge is installed . You can
move the Bridge anywhere
within your wireless network's
range, as long as you plug its
power cord into an electrical
outlet .
Refer to the User Guide on the
CD-ROM for information about
advanced settings .
12
Congratulations! Setup is complete.
Wireless-N Ethernet Bridge with Dual-Band
WET610N