Care And Maintenance - Danby Designer DCRM31WDD Guía De Utilización Y Cuidado Para El Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING THE APPLIANCE
Turn the temperature control to "0", unplug the unit, and remove the food and baskets.
Wash the inside with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to
a quart of water.
Wash the baskets with a mild detergent solution.
The outside of the unit should be cleaned with mild detergent and warm water.
CAUTION
Failure to unplug the refrigerator-freezer could result in electrical shock or personal injury.
CHANGING THE LIGHT BULB
Unplug the AC power cord from the wall.
Remove the screw that holds the light bulb cover in place.
Squeeze the tabs at the top and bottom of the light bulb cover simultaneously.
Remove the light bulb cover.
Unscrew the bulb.
Replace with a 10 watt bulb that is the same shape and size.
Replace the light bulb cover.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your refrigerator-freezer if you
minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the
proper steps to protect your food.
VACATION TIME
Short vacations: Leave the unit operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry
the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary.

CARE AND MAINTENANCE

6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dcrm31bsldd

Tabla de contenido