Tabla De Contenido; Main Components; General Safety Precautions - IPC CLEANO Instrucciones Para El Uso

We wish to thank you for choosing our appliance. We are confident that the high quality of our
appliance will meet with your satisfaction and appreciation and that our tool will give you long-
lasting service. Before starting to use your product, make sure to read with care this manual,
which has been purposely drawn up to provide you with all the necessary information for proper
use of the unit, in compliance with basic safety requirements.
CONTENTS
1 Main components
2 General safety precautions
3 Personal protection equipment
4 General recommendations
5 How to use the tool
6 Microfibre pads
7 End-of-life disposal
8 Storage
9 Problem solving
1

MAIN COMPONENTS

1) Pure water tank
2) Handgrip
3) Pump trigger
4) Locking sleeve
5) Nozzle
6) Pad support
7) Microfibre pad
8) Additional tank (optional)
2

GENERAL SAFETY PRECAUTIONS

This tool must not be used by or near
anyone not wearing suitable protective
equipment.
Never direct the jet towards
people, animals or electrical
equipment.
Do not use the tool to clean your own or other
people's clothes or shoes.
The tool must only be used by a trained person
authorised to do so.
The tool is not designed for use by anyone (inclu-
ding children) with reduced physical, sensorial
Page 10
or mental ability, or lacking the necessary expe-
Page 10
rience or knowledge, unless aided or supervised
by someone who can instruct them how to use
Page 11
it correctly and is responsible for their safety.
Page 11
This instruction booklet must be made available
Page 11
for consultation by the user.
Page 12
Do not use the tool in the vicinity
Page 12
of power lines, junction boxes,
Page 12
power sockets, etc.
Page 12
Keep at least three metres away from power lines.
If the tool is used to clean illuminated signs,
remember to switch off the power supply first.
Do not attempt to modify the tool as this could
cause a safety hazard.
Always check the components for defects before
using the tool.
Never use faulty components - replace them
immediately with original spare parts.
This tool is designed for use with pure water.
The use of non-purified water, detergents or
chemical products may affect operation and safe
use of the tool.
The manufacturer disclaims all liability for dama-
ge or injury resulting from improper, wrong or
unreasonable use of the tool, or failure to follow
the operating instructions.
Only use poles, accessories and fittings recom-
mended by the manufacturer.
Do not use the tool if there is visible damage to
the poles or fittings.
Only use original spare parts provided and
approved by the manufacturer.
10