Drive Belt; Parts Diagram - COMO AUDIO The Turntable Manual De Usuario

Please keep the original packaging in order to safely ship or otherwise transport your
EN
Turntable in the future, especially if service is ever required. The warranty does not include
damaged caused by shipping.
IN THE BOX:
➢ TURNTABLE / PLATTER / SLIP MAT / DUST COVER
➢ ALLEN WRENCH x 2 (FITS COUNTERWEIGHT AND CARTRIDGE)
➢ TWO-POINT CARTRIDGE ALIGNMENT (IF REPLACING CARTRIDGE)
➢ 15V/0.8A UNIVERSAL POWER SUPPLY
➢ RCA TO RCA AUDIO CABLE 4'/1.2M
➢ SET UP GUIDE
➢ 45 RPM "SINGLE" ADAPTER
➢ RCA TO 3.5 mm CABLE ADAPTER (FOR USE WITH COMO AUDIO AUX INPUT)

➢ DRIVE BELT

PARTS DIAGRAM:

1 Platter and slip mat
2 Drive pulley
3 Drive belt
4 Tonearm counter-weight
5 Tonearm lift lever
6 Tonearm rest
7 Tonearm
8 Headshell with finger lift and pre-mounted Ortofon OM10 cartridge with clear protective
cap
9 Dust Cover
10 Dust Cover hinges
11 Hinge fasteners
12 Analog outputs and External power supply input
2