Maytag SkyBox MBV1976AA Manual Del Usuario página 10

Assembly
Changing SkyBox™
Display Graphics
Your SkyBox™ personal beverage vendor comes with a
standard front panel. To purchase customized,
interchangeable front and side display graphics visit
your local retailer or www.skyboxbymaytag.com.
• Make sure SkyBox™ personal beverage vendor is
OFF and the power cord is unplugged.
STEP 1 – Install Side Display Graphics
• Remove top of SkyBox™ personal beverage vendor
by lifting up the tabs at rear of top panel. Pull top
cover back slightly to remove from frame. Set aside.
• Slide one customized display graphic into each side
of the SkyBox™ personal beverage vendor, tucking
the panels in at the bottom within the grooves in the
frame.
• Replace the top cover by sliding hooks into front and
then pressing down tabs at the rear.
9
STEP 2 – Change Front Display Graphic
• Flip up the graphic access cover, exposing a screw
and the top edge of the front display graphic.
• Remove the screw.
• Gently press hands onto front display graphic within
frame and slide it up and out of the personal
beverage vendor.
• Slide the new customized display graphic into the
frame, making sure the panel slides behind the lower
edge of the frame opening.
• Flip the display graphic access cover back down into
place.