Linn CLASSIK UNIK Manual Del Propietário página 4

Unpacking
The CLASSIK UNIK speaker comes in a box with the following accessories:
four rubber feet
speaker cable with two connectors
warranty card
this manual
We recommend you retain the packaging in case you need to transport the
CLASSIK UNIK speaker at a later date.
Positioning
The fully screened drive units will not affect TV/monitor picture quality, making the
CLASSIK UNIK speaker ideal for use in an AV system or with a multimedia PC. Its
small size and excellent performance also make it perfect for most multi-room or
communications applications. In addition, its durable, weather resistant, flame
retardant and UV stable cabinet ensures that the CLASSIK UNIK speaker is suitable
for many professional, commercial and industrial applications.
The CLASSIK UNIK speaker is easy to position either free standing, mounted on a
CLASSIK KOLUM speaker stand, wall-mounted using a Linn BRAKIT or hung from its
picture hook slot.
If you wish to use the CLASSIK UNIK speaker free standing, attach the supplied
rubber feet as shown below.
NOTE:
The CLASSIK UNIK speaker is weather resistant but not waterproof, so should not be
left outdoors.
CLASSIK UNIK
LOUDSPEAKER
OWNER'S MANUAL
Cleaning
Remove dust and fingerprints with a soft, damp cloth. Avoid using domestic
cleaning products on the cabinet. Take care when cleaning cabinets which you have
painted, as the surface may not be as durable as the original finish.
Connecting
The sockets are designed so that you can connect speaker cable to them using
either 4mm plugs or the cable wire.
NOTE:
The positive wire of the supplied cable has a ribbed edge on the plastic outer
covering.
To use the supplied cable's wire connections:
Loosen the terminals' plastic collars.
Insert the wire with the ribbed edge through the hole in the pillar of the
positive (red) terminal.
Tighten the collar firmly to secure the wire.
Insert the other wire through the hole in the pillar of the negative (black)
terminal.
Tighten the collar firmly to secure the wire.
IMPORTANT
:
Ensure that the two wires do not touch each other.