Using The Appliance; First Use - Hotpoint Ariston MSZ 902 NDF/HA Guia Del Usuario

Using the appliance

First use

EN
Connect the appliance to the water system and
power supply (refer to the Installation manual).
When connecting the appliance to the power supply,
the display will show the temperatures preset by the
manufacturer.
Note: Reaching the preset temperatures requires a
variable amount of time. This time depends on several
factors (times the door is open, amount of food stored,
ambient temperature). Average time is between 2 to 3
hours.
28
Guide to selecting functions
Freezer temperature
The factory-set ideal temperature is -18°C.
As soon as the freezer compartment reaches the
required temperature, it is automatically displayed. To
change the temperature, press the button
display shows the temperature required .
Refrigerator temperature
The factory-set ideal temperature is +5°C.
To change the temperature, press the button
reaching the temperature required.
Ice mode
This function enables to select the type of ice desired:
crushed ice or ice cubes
refer to the section "Using the ice and water
dispenser" section.
until the
until
. For further information