Electrical Connection; Installation - Furrion FMSN09-BL Manual Del Usuario

Installation

4. Fix the microwave into the cabinet
with 4pcs of KA screws M4x20mm
provided. (Fig. 4)
Fig. 4
5. Assemble the trim kit as shown in
(Fig. 5).
NOTE: DO NOT assemble reversed.
Fig. 5
11
6. Install the assembled trim kit over the
microwave oven and push to lock into
place. (Fig. 6 and Fig. 7)
Fig. 6
Fig. 7

Electrical Connection

Connect the microwave oven to a 120
volt, 60 Hz, AC only, 15 amp or 20 amp
dedicated circuit. It is recommended that
a separate circuit serving only the oven
be provided.