How To Start - Kenmore 116.29914 Manual De Uso Y Cuidado

i
CAUTION
Moving parts] To reduce the risk of personal injury, _F_...____2_i_
DO NOT touch the agitator when vacuum cleaner is _'_,
on. Contacting the agitator while it is rotating can __/_/_
cut, bruise or cause other injuries., Always turn off
and unplug from electrical outlet before servicing,,
Use caution when operating near children.
HOW TO START
i illl i illl
kWARNING
Personal Injury and Product Damage
Hazard
DO NOT plug in if switch is in ON
position, Personal injury or property
damage could result°
The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury,_
DO NOT use outlets above counters°
Damage from cord to items in
surrounding area could occur.
Cord
Rewind
Button.
1. Pull cord out
of canister to
desired length.,
The cord will not
rewind until the
cord rewind but-
ton is pushed,
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one blade is wider than the other. This plug
will fit in a potadzed outlet only one way, tf
the plug does not fit fully in the outlet,
reverse the piugo If it still does not fit, con-
tact a qualified electrician to install the prop-
er outtet, Do not change the plug in any
way,
2. Plug the polarized power cord into a 120
Volt outlet located near the floor,
To rewind: Turn
off and unplug the
vacuum cleaner.
Hold the plug while
rewinding to pre-
vent damage or
injury' from the
moving cord, Push
cord rewind button,,
3oLower wand from upright position by
pressing on the handle release pedal,
rift/ j_
t_ I f_ Pile Height
Release L_
Pedal
4,, Select a pile height setting by pressing
the HEIGHT ADJUST pedal on the rear of
the PowerMate, The pile height setting
shows on the indicator,, See SUGGESTED
PILE HEIGHT SETTINGS,
Attention: Refer to your carpet manufac-
turers cleaning recommendations Some
more delicate carpets may require that they
be vacuumed with the PowerMate agitator
turned off 1o prevent carpet damage,