Bulb Changing - Kenmore 116.29914 Manual De Uso Y Cuidado

BULB CHANGING
, WARNING
Electrical Shock Or Personal Injury
Hazard
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner, Failure to do so
could result in electrical shock or
personal injury from the vacuum
cleaner suddenly starting.
1. Turn off and unplug vacuum cleaner
from electrical outlet,
Flat
2,, P ry light
lens out at
slots as shown
on both sides,
Rotate lens up
and Iift off,,
3, Remove the light
bulb by pulling straight
out.,
CAUTION
Do not use a bulb rated over 9W (13V)o
During extended use, heat from the
bulb could overheat surrounding plastic
parts° , ......
4_ To replace the
light bulb, carefully
insert fully into sloL
Note: See PARTS AND FEATURES
for bulb number,
5. To replace light
lens, place tab at front
of lens into slot.,
6, Rotate lens down
and firmly snap into
place,,
21