Other Convenient Features; Care And Maintenance - Furrion FMCM17-BL Manual De Instrucciones

Other Convenient Features

Add 30 sec
In standby mode, press the Start/Add 30 sec
pad repeatedly to add cook time and the oven
will start cooking immediately by 100% power
level.
NOTE: You can also extend cooking
time(except sensor cook, auto cook, defrost)
by pressing the Start/Add 30 sec during
cooking for add 30 seconds each touch up to
99 minutes and 99 seconds.
Express Cooking
1. In standby mode, touch one of the number
pads from 1 - 6.
2. Press Start/Add 30 sec pad to confirm.
The oven will start cooking at full power
level.
Setting the Timer
Example: Suppose you want to time 3
minutes cooking.

Care and Maintenance

E-11 - Temperature sensor open
circuit:
When the temperature sensor is open
circuited, the oven enters into protection
mode and beeps, the display shows "E-11".
For troubleshooting, press Stop/Cancel pad
to return normal condition.
E-12 - Temperature sensor short
circuit:
When the temperature sensor is short
circuited, the oven enters into protection
mode and beeps, the display shows "E-12".
For troubleshooting, press Stop/Cancel pad
to return normal condition.
1. In standby mode, press Clock/Timer
pad twice "ENTER KITCHEN TIMER" is
displayed.
2. Press number pad 3, 0 and 0.
3. Press Start/Add 30 sec pad.
NOTE:
● The longest time you can set is 99
minutes and 99 seconds.
● Once you have set the timer function, in
either cooking or standby mode, you can
check the countdown by press Clock/
Timer pad twice.
Child Lock
The child lock prevents unsupervised
operation by children and this program only
works in standby mode.
To set, in standby mode, press and hold
Stop/Cancel for 3 seconds. LOCK is indicated
on the display.
To cancel, press and hold Stop/Cancel for
3 seconds. LOCK indication disappears and
releases.
E-13 - High Temperature
Protection:
While entering into super high temperature
protection status, the oven beeps and the
display shows "E-13". For troubleshooting,
press Stop/Cancel pad to return normal
condition.
E-11 - Temperature sensor open
circuit:
When the temperature sensor is open
circuited, the system enters into protection
mode and sound beeps, the display shows
"E-11", after troubleshooting, press Stop/
Cancel pad to return normal condition.
20