Panasonic DP-UB450 Instrucciones Básicas De Funcionamiento página 5

„ Front
1 Disc tray
2 USB port ( DC 5 V 500 mA)
This port supports USB 2.0 High Speed.
3 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20° up and down, 30° left and
right
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.

y When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
y If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
„ Rear
UB450
1 2
1 DC IN (12 V) terminal
2 LAN port
3
UB450
HDMI VIDEO OUT terminal
4
UB450
HDMI AUDIO OUT terminal
(Outputs digital audio signal only)
The symbols on this product (including the accessories) represent the following.
AC
DC
Class II equipment (The construction of the product is double-insulated.)
1
3 4 5
2
4 POWER LED
The LED lights up when the unit is turned on,
and flashes when error occurs.
5 Open or close the disc tray
6 Standby/on switch ( v / b )
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
UB150
1 2
5
UB450
DIGITAL AUDIO OUT terminal
(COAXIAL terminal)
6
UB150
HDMI AV OUT terminal
5 5 6 6
3 4
6
TQBS0315 (5)
5