Glass Cover Replacement; Leak Check - Furrion FGHWCLDA-BL Manual De Instrucciones

Glass Cover Replacement

1. Align the top glass cover assembly with the slots on the
cooktop and place it into the cooktop. (Fig. 7)
Fig. 7
2. Press the backside of the top glass cover and you will
hear a click noise. The top glass cover is now locked into
place. (Fig. 8 and Fig. 9)
Fig. 8
Fig. 9

Leak Check

WARNING
FIRE OR EXPLOSION
● Extinguish all open flames.
● NEVER leak test when smoking. Never use a flame.
● Do not use the appliance until connection has been leak
tested and does not leak.
● Pressure/Leak test using 11-13.8 WC pressure.
WARNING
● Gas leaks may occur in your system and result in
a dangerous situation. Always perform a leak test
for possible leaks according to the manufacturer's
instructions after installation and before any operation.
● Gas leaks may not be detected by smell alone. Gas
suppliers recommend you purchase and install a UL
approved gas detector.
1. Make sure all control knobs are in the OFF position.
2. Apply a gas leak detection liquid to the connections.
gas leaks will be indicated by bubbles.
3. If a gas leak is detected, tighten the loose joint, or replace
the faulty part with a replacement part recommended by
Furrion authorized retailer.
Any
9