Battery Replacement; Maintenance & Cleaning - Iso-Tech ILCM 03A Manual De Instrucciones

5. Battery Replacement

When the low battery symbol is displayed on the LCD, replace the old
batteries with two new batteries.
5.1.Turn the power off and remove the test leads from the clamp meter.
5.2.Remove the screw of the battery compartment.
5.3.Lift and remove the battery compartment.
5.4.Remove the old batteries.
5.5.Insert two new 1.5V SUM-3 batteries.
5.6.Replace the battery compartment and secure the screw.
6. Maintenance & Cleaning
Servicing not covered in this manual should only be performed by qualified
personnel. Repairs should only be performed by qualified personnel.
Periodically wipe the case with a damp cloth and detergent; do not use
abrasives or solvents.
Address of Agent, Distributor, Importer, or Manufacturer
12