Fcc Statement - KlipXtreme Allure KLS-660 Manual De Instrucciones

Driver unit
Speaker
Reference RMS power
Frequency
Impedance
Speaker
Sensitivity
Signal to noise ratio
THD
Wireless range
Microphone
Connectivity
Directivity
Frequency
Impedance
Microphone
Sensitivity
Connectivity
Connection type
Memory card slot
Wireless RF frequency
Wireless range
Audio input
Additional inputs
Battery
Battery type
Battery charging time
Battery run time
Battery standby time
Battery charging method
Specifications
Dimensions
Weight
Highlighted Features
Lighting effect
Remote control
Microphone
Power bank
Tuner
Others
Warranty
* Approximate battery run time depending on usage and volume settings.
2x 2in at 4 (20W each)
40W
40Hz - 20kHz
4 , ±15%
85dB, ±3dB
≥65dB
1kHz 0dB (±10%）
33ft
Wired and wireless
Unidirectional
40Hz-15kHz
10K at 1kHz
5dB
compatible
®
Bluetooth
USB/SD
TM
2.408GHz
33ft
RCA stereo
Two ¼in mic inputs
3.2A 12V lead-acid battery
4 hours
11 hours at medium volume level*
10 hours
1.5m power cable
12.2x13.1x25in
24lb
Yes, with on/off option
Yes, with AAA batteries (included)
Yes, wireless (included)
Yes
Yes, FM antenna
USB, SD
input, Line in (RCA: left and right)
TM
recording feature, mic priority
One year
Precautions
• Do NOT use this unit for anything other than its intended use.
• Do NOT expose the speaker to excessive heat or to direct sunlight for long periods of time.
• Do NOT expose the speaker to rain or water, and avoid environments with high humidity or dust.
• Do NOT disassemble, repair or modify the speaker yourself. There are no user serviceable parts inside the
unit. Only qualified personnel should be allowed to perform repairs without voiding the warranty.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT use near a microwave oven or wireless LAN products.
• Do NOT place containers with liquid on top or near the speaker.
• Do NOT place objects which are sources of heat on the speaker cabinet such as lighting equipment or
smoke machines.
• Do NOT stack the speaker cabinet in a manner that could cause injury should a cabinet become dislodged.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfe-
rence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.