Eeprom Memory; Erasing A Manual Preset - Thrustmaster Dual Trigger 3-in-1 Manual Del Usuario

SWITCHING BUTTONS / MINI-STICKS / D-PAD
All progressive buttons (on PS2 and PS3) or digital buttons (on PC), directions of the mini-sticks and of
the D-Pad can be switched using the MAPPING button (6).
 Examples of possible applications:
- Switching the functions of buttons
- Switching the 2 mini-sticks
(in this case, you must map the 4 directions of the first mini-stick to the 4 directions of the second)
- Switching the D-Pad with a mini-stick
(in this case, you must map the 4 directions of the D-Pad to the 4 directions of the mini-stick in
question).
 Procedure for switching buttons, mini-sticks and D-Pad (does not work with triggers)
Steps
1 Enable MANUAL PRESET (7) by pressing the button.
2
3 Press and release the button or direction to switch.
Press and release the button or direction onto which you wish to
4
Your MANUAL PRESET is now enabled and updated (with the 2 functions switched)

EEPROM MEMORY

 Your gamepad includes an internal chip which saves all of your MANUAL PRESET programming
(even if the gamepad is switched off or disconnected for a long period of time).
 You can save a different MANUAL PRESET for each platform you use:
Playstation®1, Playstation®2, Playstation®3, PC 4 Axes, and PC 6 Axes.

ERASING A MANUAL PRESET

Steps
1 Enable your MANUAL PRESET (7).
Press and hold the MAPPING button (6)
2
Your MANUAL PRESET is now blank (and once again identical to the Automatic Preset).
Action
Press and release the MAPPING button (6).
place the function.
Action
for 2 seconds.
7/10
PRESET button
color (7)
Lit up Green
Lit up Red
Flashes Red
Lit up Green
PRESET button
color (7)
Lit up Green
Flashes Green
2 seconds