Troubleshooting - Beta 7042LCD Manual De Instrucciones

INSTRUCTIONS FOR USE

TROUBLESHOOTING

FAQs
Filters do not darken, or
fl ickers
Reaction is slow
Filter is not clear
CAUTION! If the above-mentioned questions cannot be solved, stop using the product immediately and
contact the dealer.
PRODUCT GUARANTEE
12 months from date of purchase – The warranty consists in free repairs or replacments at our headquar-
ters – The warranty does not cover replacements or repairs of any parts subject to normal wear and tear
as the result of operation – The warranty will not apply if the device is damaged through misuse.
1. Helmet body
2. Headgear
3. Headgear angle adjusting knobs
4. Headgear adjusting knob
5. Shade number adjustment
6. Protective plate
7. Solar panel
8. Fixed plate
9. Front frame
10. UV/IR fi lter
CAUSES
Protector is damaged
Arc sensor is not clear
Welding current is too low
Battery is low
Ambient temperature is too low
Sensitivity setting is too low
Protector is stained
Protective fi lm has not been removed
Filter lenses have stains
6 7
9
Clean or replace it
Clean sensor surface
Adjust sensitivity to maximum
Replace battery
Do not use below -5 °C
Raise sensitivity properly
Clean or replace protector
Remove protective fi lm
Wipe both sides of fi lter lenses
2
1
8
5
10
EN
SOLUTIONS
4
3
11