Guardian Fall Protection 00645 Manual De Instrucciones página 10

Compatibility: When making connections with CB Anchors, eliminate all possibility of roll-out.
Roll-out occurs when interference between a hook and the attachment point causes the hook
gate to unintentionally open and release. All connections must be selected and deemed
compatible with CB Anchors by a Competent Person. All connector gates must be self-closing and
self-locking, and withstand minimum loads of 3,600 lbs. See the following for examples of
compatible/incompatible connections:
Connector
closed and
locked to
D-ring. OK.
Two or more
snap hooks or
carabiners
connected to
NO.
each other.
Two connectors
to same
D-ring. NO.
Incompatible
or irregular
application,
which may
increase risk
of roll-out. NO.
All installation of CB Anchors MUST be performed by a Competent or
Qualified Person, or by a Guardian Fall Protection certified installer.
Refer to Guardian's "Absorbinator" instructions for information regarding
the use of CB Anchors in combination with horizontal lifelines.
"Absorbinator"
Shock Absorber
8
!
WARNING
Connector
to integral
lanyard.
NO.
Connector
directly to
webbing.
NO.
Application
that places
load on gate.
NO.
Connector
directly to
horizontal
lifeline. NO.