Labels - Guardian Fall Protection 00645 Manual De Instrucciones

Labels

1-800-466-6385
www.guardianfall.com
6305 S. 231st St.
Kent, WA 98032
Compliant with OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
3--1/2"
!
WARNING
Inspection Grid
Date of First Use:
________________
If equipment fails inspection, IMMEDIATELY REMOVE FROM SERVICE
Made in China
3/4"
1-800-466-6385
6305 S. 231st St.
Kent, WA 98032
www.guardianfall.com
Capacity range: 130-310 lbs., or up to 420 lbs. if used
with equipment explicitly certified for such use.
All PFAS equipment must be selected and deemed
compatible with CB Anchor by a Competent Person.
Only make compatible connections.
Refer to instructions for proper installation and
connection methods.
Inspection
Date of First Use:
________________
J F
20___
20___
20___
20___
20___
6"
CB Anchor Series
instructions provided with equipment at time of shipment.
Part #:
Date of Manufacture:
Refer to instructions for proper installation and connection methods.
MAXIMUM 1 Avoid contact with hazards, including, but not limited to, heat,
connection per anchor. chemicals, electricity, and sharp or abrasive edges and surfaces.
User must inspect prior to EACH use. Competent Person
must complete formal inspection every 6 months.
Competent Person to inspect and initial.
Product lifetime is indefinite as long as equipment
passes pre-use and Competent Person inspections.
90087 (Rev. B)
DO NOT REMOVE LABEL
3"
CB-1-B Prior to use, read and understand
all manufacturer's instructions provided
Part #: 00600
with equipment at time of shipment.
Date of Manufacture:
Materials: galvanized steel
or powder-coated steel
Compliant with OSHA 1910, OSHA 1926 Subpart M, 90088
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations. (Rev. A)
!
WARNING
MAXIMUM 1 connection per anchor.
Avoid contact with hazards, including, but
not limited to, heat, chemicals, electricity,
and sharp or abrasive edges and surfaces.
DO NOT remove labels.
User must inspect prior to EACH use. Competent Person must complete
formal inspection every 6 months. Competent Person to inspect and initial.
Product lifetime is indefinite as long as equipment
passes pre-use and Competent Person inspections.
If equipment fails inspection, IMMEDIATELY REMOVE FROM SERVICE.
M A M J J A S O N
For reference only. To be blank window.
Select applicable product part #.
Prior to use, read and understand all manufacturer's
Materials: Galvanized steel or powder-coated steel
Only make compatible connections.
All PFAS equipment must be selected and deemed
compatible with CB Anchor by a Competent Person.
Capacity range: 130-310 lbs., or up to 420 lbs. if used
with equipment explicitly certified for such use.
J F M A M J J A
20___
20___
20___
20___
20___
D
S O N D
13