Function - Resol AM1 Instrucciones

AM1 alarm module

3. Function

The AM1 alarm module is an interface for the failure signal
transmission between RESOL devices and external appli-
cations. It is to be connected to a RESOL controller or
calorimeter via the RESOL VBus
When the AM1 is operational, the LED will glow continuously
to signal operational readiness.
If the LED does not glow, check the connection of the
¿
device!
The AM1 receives and processes the VBus
of the device connected. In the case of a failure signal,
the integrated Flash-LED flashes and the AM1 operates a
potential-free relay.
The relay can e. g. be used to connect an additional signal-
ling device, or to connect to a building management system
(BMS). The failure signals can thus be issued as a collective
error message by the BMS.
.
®
data packets
®
11
|