Cleaning Accessories; Assembly Parts - Eureka 40 Serie Guia Del Usuario

➀
➀
➀
Power Switch
➂

Cleaning Accessories

➊
6
➁
FIG 1
FIG 2
➁
Bare Floor Brush
ENGLISH

ASSEMBLY PARTS

➀
Vacuum Cleaner
➁
Crevice Tool
Assembly / Storage
➀
Wrap electrical cord around the base of the cleaner. Secure elec-
trical plug to cord to prevent cord from unwinding.
➁
Store crevice tool inside the base of the cleaner.
How to Use
CAUTION: Moving parts. Make sure the power switch is in off (O)
➁
position before plugging in.
Power Switches
➀
Nozzle Cover
➁
The nozzle features a rotating bare floor brush that covers the
brush roll. When the bare floor brush is in the up position, the
brushroll can be activated to clean flat, carpeted areas such as
stair steps or upholstery.
Twist the nozzle down to engage the bare floor brush for cleaning
bare, hard surfaces such as uncarpeted stairs.
CAUTION: To prevent injury, turn off the power switch and
uplug cleaner before rotating the nozzle.
Cleaning Accessories
➂
CAUTION: Moving brush roll, power switch should be in suc-
tion only position when using hose.
➋
➊ Pull the hose adaptor on cleaner.
➋
Pull the crevice tool out of the base of the cleaner.
➌
Place the crevice tool on the end of the hose.
When cleaning is completed, store crevice tool back in the
base of the cleaner and replace the hose in the hose adapter
on the cleaner.
(Fig 1)
(Fig 2)