Rise VIGILANT 500 Manual De Instalación página 12

GB
Assembly instructions - VIGILANT 500
1 - Place the three side elements vertically as in the image alongside.
2 - Using the round head screws provided, assemble the hexagonal struc-
ture. It is very important to assemble the three elements vertically and on
a surface that ensures excellent flatness so as to obtain a reliable support
surface for the closing flange. Attention: The screw head must be placed
on the internal side of the foundation case. See figure alongside.
3 - Before fixing the upper flange, insert the metallic protection of the 40 mm
diameter corrugated pipe which must be set in the ground to make the sub-
sequent electrical connection with the control unit. See figures alongside.
12 - VIGILANT - rev.00