Rise VIGILANT 500 Manual De Instalación página 14

GB
Assembly instructions - VIGILANT 500
7 - Use three eyebolts with M16 studs to lift the bollard.
See figures alongside.
8 - Insert the electrical cable in the corrugated sheath and then, guiding it,
lower the bollard into the foundation case. Pay attention to the electrical
cable that must be free in the case housing without being crushed. See
figures alongside.
9 - After positioning the bollard inside the case, remove the lifting eyebolts.
Using the dowels, adjust the level positioning of the bollard with respect to
the floor, checking it with a spirit level. See figure alongside.
14 - VIGILANT - rev.00