Fisher&Paykel GC912 Guia Del Usuario página 14

Care and cleaning
Replacing the grates
The wok grate goes in the center over the wok burner. The other two grates are interchangeable.
Re-assembling the brass wok burner
Each part of the brass burner has locating pins to help you to assemble it correctly after cleaning.
Incorrect assembly can cause dangerous irregular flames and ignition problems. Refer to this
diagram for the correct order of assembly. Note: The brass parts of your wok burner will change
color with use. This will have no effect on the performance.
12
Rounded corners
Correct grate orientation
Inner cap
Outer cap (small holes)
Trim ring
Vent ring with locater pins
(large holes)
Align and insert pin
(some models only)
Rotate vent ring to align locater
pin with hole in burner base.
Side view