Zodiac ZD-360 Manual De Usuario página 12

ENGLISH
USER GUIDE
ANTENNA
LCD Screen
Displays the current
channel selection and
other radio symbols.
PTT (PUSH to TALK) button
Press and hold to transmit.
Torch button
Press to turn on and
off the torch
UP/DOWN Buttons
Press to change
channels, volume, and to
select settings during
programming.
1. LCD Screen
TX Displayed when transmitting a signal.
RX Displayed when receiving a signal.
DCM Displayed when the Dual Watch function turned ON.
DCS Displayed when the Digital Code System turned On.
VOX Displayed when the VOX feature enabled.
SCAN Displays when the PMR scanning all channels.
Displayed when the Key Lock feature activated.
Displayed the current Speaker volume level.
Displayed when the call signal is ON.
Speaker
Channel number. Changes from 1 to 8 as selected by the user.
CTCSS code. Changes from 1 to 38 as selected by the user.
Displays the Battery change level. When the bars are reduced, the battery
needs recharging.
PWR/VOL Switch
Rotate clockwise/counter clockwise
to turn the unit ON or OFF.
Charge /Ear jack
CALL button
Press to send ringing tone
to other PMR units.
FM button
MIC (Microphone)
MENU Button
Press to change To switch between Modes.